What are the Use Methods of Textile Waterproofing Agent

Dec 10, 2021

Textile waterproofing agents are generally processed on textile fabrics or clothes. The specific methods of use are as follows: 1. Padding method: The waterproofing agent is formulated into working fluid, and the working fluid is passed through the rolling groove on the setting machine, dried, and shaped (the setting temperature is based on Fabrics of different materials have different temperature requirements); 2. Dipping method: mix the water-repellent agent into a working fluid in a certain proportion, soak the fabric or garment that needs to be waterproofed in the solution for about 30 minutes, take it out, and dehydrate. Drying (if it is a piece of fabric, it is recommended) to shape on the setting machine, if it is a garment, it can only be dried, and the temperature should be higher as much as possible, which can increase the waterproof effect and the waterproof effect after washing; 3. Waterproof agent can be used It is matched with the coating product and scraped on the textile fabric in a coating manner. In this way, according to the requirements for the waterproof effect, the scraping technology also has great requirements. For example, some need to achieve a siphon effect. The need to achieve anti-perspiration effect, etc., different requirements have high requirements on operating technology. textile auxiliaries company specializing in the production and sales of textile waterproofing agents, in terms of waterproofing, three-proofing (waterproof, oil-proof, stain-proof or easy to decontaminate), fabric micro-windows, siphon, sweat-proof, single-parent and single-proof, etc. There are a large number of mature technical precedents, and a high-quality technical team provides technical support.

The method of plugging king construction and use: 1. Grassroots treatment: Before construction, ensure that the grassroots is strong, free of dust, debris, oil and other loose objects. 2. Slurry mixing: Pour an appropriate amount of clean water into a clean container, add powder, 0.3~0.5L of clean water per kilogram of powder (the amount of water can be adjusted according to the feel of the constructor and the ambient temperature and humidity), and stir quickly until it is formed Uniform slurry without agglomeration. 3. Leakage plugging and repair: There are three main forms of leakage in general waterproofing projects, namely, point, seam and surface leakage. According to the specific situation of the project's leakage water, the quick-setting waterproof plugging device can be used for remediation by using different water-stopping and plugging techniques. 1) Waterproof plugging of leaking holes. Waterproof treatment of the parts around the leaking hole. Mix the powder with water and apply it around the leaking hole. Generally, use a trowel or scraper to apply 2 to 3 times. After each pass, after the coating is hardened (no fingerprints left by hand pressing), spray it wet (but without standing water), and then carry out the next construction. Tick ​​round grooves to plug leaks Take the leaking point as the center of the groove (the diameter × depth of the groove is 10mm×20mm, 20mm×30mm, generally the capillary water seeps into a round hole with a diameter of 10mm), and rinse the tank with water. Mix the powder with water and knead it into a cone with a diameter similar to that of the trough. Place it for a while until it feels hard when pinched by hand, then insert it into the trough, squeeze it with a wooden stick, and lightly smash it to the inside and the surroundings. Tight and squeeze to stop the water instantly. 2) Waterproof plugging of leaking cracks. Waterproof treatment of the parts around the leaking cracks. Mix the powder with water and apply it around the leaking cracks. 

Generally, use a trowel or scraper to apply 2 to 3 times. After each pass, after the coating is hardened (no fingerprints left by hand pressing), spray it wet (but without standing water), and then carry out the next construction. Sealing the eight-shaped groove to plug leaks The eight-shaped groove with a depth of 10mm~30mm and a width of 15mm~50mm along the crack. Put a small rope along the crack at the bottom of the groove, the rope length is about 200~300mm. Mix the powder with water and knead it into a strip. Place it for a while until it feels hard to pinch it with your hands. Then fill it into the groove of the rope and quickly compact the edge. Then the rope is pulled out and compacted again to make The leaking water flows out along the rope hole. Longer cracks can be filled step by step, each with a length of about 100mm~150mm, and a gap of 20mm wide in each gap. At the 20mm gap, use the nails wrapped with the mixing material to insert into the gap when the mixing material is about to solidify, and quickly use the mixing material to compact the space around the nails, while rotating the nails and pulling them out immediately, so that the nails are smooth The hole flows out. After the plugging material has solidified, handle the nail holes according to the waterproof plugging method of the leaking hole.